Protecting your prized possession

Whether it’s a fishing boat, pontoon, personal watercraft or high performance speed boat, Hewitt Manufacturing has a boat lift perfectly sized, equipped and priced for your needs. Hewitt Lifts keep your watercraft convenient and ready while protecting them from the damaging effects of prolonged exposure to waves, algae and floating debris. Hewitt canopies provide additional protection, shielding your boat from rain, hail and sun.

Hi-Lift Vertical Lift

Straight up, straight down – A lift for deep water or changing levels

The Hewitt Hi-Lift is an economical, direct vertical rise lift that is ideally suited for deeper water applications or sites where water levels may fluctuate.  These lifts are based on simple, proven technology but are distinguished by Hewitt's rock-solid construction and unique frame design.  Hewitt Hi-Lifts incorporate side bars that provide greater stability than "V"-style side designs.  Side bars are also set lower for easier boat access.  Some competitor's side bars are adjustable, but the design limits maximum lift height.  Ten models provide lifting capacities ranging from 1100 lbs. to 10000 lbs. 

Features

• Corrosion-resistant structural aluminum frame with pre-strung stainless steel cables.
• Corrosion-resistant full-width acetal delrin plastic pulleys with hardened cast bronze bushings.
• End-mounted pulleys – no pulleys or exposed cables midway to interfere with access.
• Four 30” leveling legs with quick pins for easy adjustment on 1100 lb–6600 lb series. Longer legs available.
• Four 48” leveling legs with quick pins for easy adjustment on 8000 lb–10000 lb series. Longer legs available.
• Four non-scratch cradles and two keel protectors on 1600 lb series.
• Full-length bunks and two keel protectors, 2600 lb-10000 lb.
• Extra long cable adjustment bolts.
• Model HL1100 equipped with Dutton Lainson winch, 4:1 ratio. Model HL1600, 6:1 ratio.
• Models HL2600 to HL5600 equipped with Hewitt high efficiency winches – 15:1
  and 20:1 ratios.
• 40” aluminum winch wheel with spinner knob.
• Model HL6600 equipped with heavy-duty electric winch.
  Optional 25:1 ratio winch with wheel also available.
• Model HL8000 and HL1000 equipped with electric winch.

1600-6600 series cables

8000-10000 series cables

Cantilever Lift

Simple, reliable design for boats and pontoons

The Original Hewitt Lift continues to be one of our most popular models. These rugged general purpose lifts have a natural mechanical advantage that actually makes operation easier as the boat is raised higher. Cantilever Lifts also have a long history of trouble-free performance. They require few moving parts for superior reliability and place less stress on pulleys and cables. In the lift’s fully raised position, cables carry no weight; the load is entirely supported by the frame. Corrosion resistant aluminum construction also assures low maintenance – no rust, no painting.

Standard Model
Standard Cantilever Lifts include self-adjusting cradles and keel protectors, manual winch and rubber end caps. Deluxe rubber cradles and keel protectors are available as options. Capacities range from 1200 lb to 4800 lb. Standard cradles are found on lifts ranging from 1200 lb to 1800 lb. Lifts 2400 lb and larger come standard with full-length bunks. Models for personal watercraft are shown here.

Wide ‘N’ Long Model
These Cantilever Lifts are solidly built and heavily reinforced for today’s extra wide, extra long craft. They are also an ideal lift for larger pontoon boats, with interior frame dimensions up to 120”.

Pontoon Kits
A variety of pontoon cradle kits can be installed in place of the standard boat cradles. Options include wood and adjustable aluminum rack kits that lift under the pontoon’s deck and serve as positioning guides. There are also two styles designed to cradle the pontoons: an adjustable aluminum model and a wood “V” bed covered with marine carpeting for full-length protection.

Features

	Heavy-Duty All-Aluminum Construction Hewitt takes no shortcuts. Some lift makers use nothing more than a bolt for      critical pivot joints. Hewitt Lifts are designed with double-reinforced pivots that are made with structural aluminum tubing and welded, through-hole construction – superior strength for superior reliability.
	Extra Reinforcing It is not unusual for poorly built lifts to sway or even break when subjected to frequent use. Hewitt Lifts are built for the real world. Crossbars are reinforced with extra large gussets with welds on both sides, providing greater lateral stability and overall strength.
	Pulley Boxes While lesser brands may simply bolt pulleys to the frame, Hewitt Lifts have specially designed enclosures. Pulley assemblies are mounted in reinforced plate aluminum boxes that are welded directly to the frame. Cantilever Lifts also use fewer pulleys and all parts are easily accessible for reduced maintenance.

Storage Lift